Heat Exchanger

Shell & Tube Heat Exchanger U-Tube Bundle Heat Exchanger Air Cooled Heat Exchanger Air Cooled Condenser Air Fin Cooler Oil Coolers Marine Heat Exchanger Kettle Reboiler Type Exchanger Double Pipe Heat Exchanger Flue Gas Air Preheater Plate Finned Heat Exchanger Plate Heat Exchanger Brazed Plate Heat Exchanger Pressure Vessel Coil Type Heat Exchanger Removable Tube Sheet Reactor Type Heat Exchanger Fixed Tube Sheet Tube Bundle Heat Exchanger Transformer Oil Cooler Vertical Shell Tube Air Heat Exchanger Aluminium Heat Exchanger Compact Heat Exchanger Copper Heat Exchanger Finned Heat Exchanger Water Heat Exchanger Stainless Steel Heat Exchanger Manufacturers Products Contact Us Enquiry

Shell and Tube Heat Exchanger

The shell and tube can be many variations on the shell and tube design. Shell and tube of each tube are connected to plenums through holes in tubesheets. shell-and-tube heat exchangers which typically have U-tubes. Shell and Tube are used to boil water recycled from a surface condenser into steam to drive a turbine to produce power.

Shell and Tube Heat Exchanger of these requirements call for careful selection of strong, thermally-conductive, corrosion-resistant, high quality tube materials, typically metals, including copper alloy, stainless steel, carbon steel, non-ferrous copper alloy, Inconel, nickel, Hastelloy and titanium. Shell and Tube Heat Exchanger choice of tube material could result in a leak through a tube between the shell and tube sides causing fluid cross-contamination and possibly loss of pressure.

Shell and Tube Heat Exchanger to transfer heat well, the tube material should have good thermal conductivity. Because Shell and Tube Heat Exchanger is transferred from a hot to a cold side through the tubes, there is a temperature difference through the width of the tubes. Because of the tendency of the tube material to thermally expand differently at various temperatures, thermal stresses occur during operation.

Shell and Tube Heat Exchanger is in addition to any stress from high pressures from the fluids themselves. The Shell and Tube Heat Exchanger material also should be compatible with both the shell and tube side fluids for long periods under the operating conditions temperatures, pressures, pH, etc, to minimize deterioration such as corrosion.

The simple design of a shell and tube heat exchanger makes it an ideal cooling solution for a wide variety of applications.Shell and Tube Heat Exchanger most common applications is the cooling of hydraulic fluid and oil in engines, transmissions and hydraulic power packs. With the right choice of materials they can also be used to cool or heat other mediums, such as swimming pool water or charge air.[4] One of the big advantages of using a shell and tube heat exchanger is that they are often easy to service, particularly with models where a floating tube bundle (where the tube plates are not welded to the outer shell) is available. Shell and Tube Heat Exchanger also be used on fixed tube sheet heat exchangers.

Products